QUICSEAL 124 is a single component, ready-to-use, liquid applied waterproof membrane. QUICSEAL 124 comprises of special blend of copolymers and additives to provide an excellent seamless, elastomeric and quick-drying waterproofing membrane.
QUICSEAL 124 is suitable for waterproofing (concealed) applications for the following areas:
The substrates must be clean and sound, free of dust and loose particles. Remove laitance, oil, grease, mould release agents or any foreign contaminants which may inhibit adhesion from substrate by using wire brush, scabbler or other approved means. Where moss, algae or similar growths have occurred, treatment with suitable chemicals should be carried after the initial cleaning process followed by further washing.
It is recommended that a cement & sand fillet be formed at all corners to receive the waterproofing membrane.
Stir QUICSEAL 124 manually before application. For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the membrane. Care must be taken to ensure that air is not entrapped in the membrane.
Pre-treat QUICSEAL 124 on all corners, upturns and pipe penetrations with a brush followed by application to the general areas and allow to dry. Allow membrane to dry for approximately 45 minutes before application of the second coat.
After applying the 2nd coat of waterproofing membrane, allow it to cure for 4 hours before laying the screed.
Pack size : 5 kg pail and 20 kg pail
Coverage : 0.4kg/m2/coat Wet film thickness/ coat : 0.4 ± 0.1mm
Due to high adhesion strength of this product even on metals, it is advisable to wash tools with water before the product sets. After setting, cleaning can only be achieved by mechanical means.
The shelf life of QUICSEAL 124 is 12 months when stored unopened in a cool and dry place.