QUICSEAL 201 is a low modulus elastomeric, non-sag, and polyurethane sealant. It is easily gunnable and reacts with moisture in atmosphere to form a flexible rubber seal.
Areas of Application
QUICSEAL 201 is recommended as a construction sealant for cementitious building materials, ceramics, glass, metal, anodized aluminum, wood and etc
Expansion and construction joints in:
Clean, dry and remove any oil, grease and loose particles from the substrates. All weak parts of the joint should be grinded and blown out with compressed air.
QUICSEAL 404 BACKER ROD (approximately 30% oversize) should be placed into the joint to the required depth. (Optimum performance is achieved when width: depth is 2:1) QUICSEAL BACKER ROD is normally used as a bond-breaker, ensuring that the sealant bonds only to the sides of the joint. Alternatively, a debonding tape may be placed at the base of the sealing slot prior to the application of QUICSEAL 201.
It is also recommended that masking tape be placed over the sides of the joints and removed immediately after tooling.
Apply QUICSEAL 201 with a barrel gun into the prepared joint and tool immediately to achieve a leveled surface. To achieve optimum adhesion on porous substrate, QUICSEAL 201 Primer is recommended.
600ml per sausage
The shelf life for QUICSEAL 201 in unopened and undamaged packaging is 12 months. The product must be kept unopened and store under cool condition to prevent surface evaporation and should be protected from direct sunlight.
QUICSEAL 201 is non-hazardous and non-toxic but avoid any prolonged skin and eye contact by wearing suitable protective clothing.